Hartford Building Products
HBP- Series 1- Heavy Duty Bypass Hardware Kit- 4 Wheel Ball Bearing Hangers
HBP- Series 1- Heavy Duty Bypass Hardware Kit- 4 Wheel Ball Bearing Hangers
Couldn't load pickup availability
Series 1- HBP Bypass Hardware Kit
Bypass doors are composed of two doors normally that slide past each other in the door opening. Since there are less doors used than in a Bifold of the same size, each door is normally wider, For instance, a 6' wide closet would have two 3' (36" ) wide doors to make up the width.
A thing to also remember is when using a Bypass door installation, the opening may have to be undersized slightly, to allow for an overlap, or make one of the doors wider, Example, using a 32" or 30" wide door for a 5' wide opening.
NOTE:
The track and hardware takes up from 1 3/4" to 2 1/4" - From the Top of the Door to where you install the track. You can adjust the height of the rollers.
Installation Instructions
- For 1 3/8” to 1 3/ 4” Thick Doors
- Track is Heavy Duty Extruded Aluminum
- 4 Wheel Ball Bearing Hangers
- **New and Improved Ball Bearing Rollers with Axles
- Jump proof twin Channel Design, with “V” shaped Rails and Integral
- Two separate tracks for custom fit
- Up to 250 lbs Per Door
Set Includes the following Items:
- 2 Heavy Duty Aluminum Double Box Tracks
- 4 - Four ( 4 ) Wheel Ball Bearing Hangers
- 1 Adjustable Floor Guide. Adjusts from 3/4” to 1 3/4”
- 2 Flush Cups
- Includes all Screws and Wrench
- Track Size- 1 1/8" High x 1 3/4" Width each
***We reserve the right to substitute parts of equal or better quality***
Share
