News — Pocket Door

Here is a viewing copy of the installation instructions for our Pocket Door EZ Closer If you need a Printer Friendly version, please click here and you can open a version you can print for your own records. Click here to view the Pocket Door EZ Closer.

HBP- Heavy Duty  DOUBLE   Pocket Door Frame Kits- with Converging Door Kit  Widths-   18"  to   48" Lengths-   80",  84" and  96" Wall-  For   2 x 4   or    2 x  6 Wheels- 4- Wheel Ball Bearing Hangers - 250 lbs Weight Limit   Studs-   Galvanized all Steel Studs-  Will Not Rust     Headers-   Solid  Wood  Header attached to Track with Ball Bearing Roller                   System.   * Converging Door Kit:   joins Two ( 2 )- Single Pocket Door Frame Kits to make a Double Door Kit.    The Built in Stops keep the Doors from going pass the Middle. ...

HBP- Heavy Duty  SINGLE  Pocket Door Frame Kits-   ALL IN STOCK Widths-   18"  to   48" Lengths-   80",  84" and  96" Wall-  For   2 x 4   or    2 x  6 Wheels- 4- Wheel Ball Bearing Hangers - 250 lbs Weight Limit   Studs-   Galvanized all Steel Studs-  Will Not Rust     Headers-   Solid  Wood  Header attached to Track with Ball Bearing Roller                   System.   Available - 4- Wheel  Ball Bearing Soft Close or Soft Open -  220 lbs Pocket Door EZ Closer   NOTE:  Doors that are  18"  to  28" Wide can only have EITHER a  Soft Close or...

 Check out our Series 1- HBP- Heavy Duty Pocket Door Track & Hardware *With  SOFT CLOSE  & SOFT OPEN-   FOR DOORS UP TO 220 lbs For 2 x 4 or 2 x 6 Interior Wall Construction For 1 3/8” or 1 3/4” Thick Doors - **NOTE: Minimum door thickness of 1” For Sizes in Between, Cut as needed.   Soft Close and Soft Open Option-   Not available below 30", due to combined widths of Soft Close an Soft Open Heavy Duty Extruded Aluminum Track- Jump proof precision extruded Box Track Commercial Grade, Lifetime Warranty NOTE: You can cut down the Track...

HBP Pocket Door Frame Kits - New Studs   Hartford Building Products now has solid steel studs made from galvanized steel . These studs do not rust. In addition, these studs are designed so that 1 3/4” thick doors have more room available to fit in a 2 x 4 kit. No adapters are needed to fir these 1 3/4” thick doors.   The steel studs are available for 80” (6/8) , 84” (7/0), and 96” (8/0) heights. They can be cut to any height between these standard heights.. There are two openings cut at the top of each stud....