News — Pocket Door Hardware

Common Pocket Door Questions: Can you put a pocket door on a block wall? Yes, you can build a pocket door into a block wall. When you are building the wall, you can either purchase a pocket door kit made for the correct wall thickness, 6”, or fir out a kit 1/2” for a kit kit made for 2 x 6 walls. An easier way to add a pocket door to an already existing wall, is to make an add on wall attached to the block wall, which keeps you from tearing a block wall apart. Can any slab door...

Here is a viewing copy of the installation instructions for our Pocket Door EZ Closer If you need a Printer Friendly version, please click here and you can open a version you can print for your own records.  

 Check out our Series 1- HBP- Heavy Duty Pocket Door Track & Hardware *With  SOFT CLOSE  & SOFT OPEN-   FOR DOORS UP TO 220 lbs For 2 x 4 or 2 x 6 Interior Wall Construction For 1 3/8” or 1 3/4” Thick Doors - **NOTE: Minimum door thickness of 1” For Sizes in Between, Cut as needed.   Soft Close and Soft Open Option-   Not available below 30", due to combined widths of Soft Close an Soft Open Heavy Duty Extruded Aluminum Track- Jump proof precision extruded Box Track Commercial Grade, Lifetime Warranty NOTE: You can cut down the Track...

HBP Pocket Door Frame Kits - New Studs   Hartford Building Products now has solid steel studs made from galvanized steel . These studs do not rust. In addition, these studs are designed so that 1 3/4” thick doors have more room available to fit in a 2 x 4 kit. No adapters are needed to fir these 1 3/4” thick doors.   The steel studs are available for 80” (6/8) , 84” (7/0), and 96” (8/0) heights. They can be cut to any height between these standard heights.. There are two openings cut at the top of each stud....

New HBP Pocket Door Soft Close / Soft Open   Hartford Building Products has a new soft close for our pocket door frame kits, and our Series 1 track system. This is a much heavier duty soft close, having a 220 pound capacity, instead of the old 140 pound. A nice new feature is the metal connector for the sections, where they go together, instead the old plastic connector.   This soft close can replace the old ones, if needed, since they fit in the same track. It is just a much better system.