News — Soft Close for Pocket Doors

Common Pocket Door Questions: Can you put a pocket door on a block wall? Yes, you can build a pocket door into a block wall. When you are building the wall, you can either purchase a pocket door kit made for the correct wall thickness, 6”, or fir out a kit 1/2” for a kit kit made for 2 x 6 walls. An easier way to add a pocket door to an already existing wall, is to make an add on wall attached to the block wall, which keeps you from tearing a block wall apart. Can any slab door...

HBP- Heavy Duty  DOUBLE   Pocket Door Frame Kits- with Converging Door Kit  Widths-   18"  to   48" Lengths-   80",  84" and  96" Wall-  For   2 x 4   or    2 x  6 Wheels- 4- Wheel Ball Bearing Hangers - 250 lbs Weight Limit   Studs-   Galvanized all Steel Studs-  Will Not Rust     Headers-   Solid  Wood  Header attached to Track with Ball Bearing Roller                   System.   * Converging Door Kit:   joins Two ( 2 )- Single Pocket Door Frame Kits to make a Double Door Kit.    The Built in Stops keep the Doors from going pass the Middle. ...

HBP- Heavy Duty  SINGLE  Pocket Door Frame Kits-   ALL IN STOCK Widths-   18"  to   48" Lengths-   80",  84" and  96" Wall-  For   2 x 4   or    2 x  6 Wheels- 4- Wheel Ball Bearing Hangers - 250 lbs Weight Limit   Studs-   Galvanized all Steel Studs-  Will Not Rust     Headers-   Solid  Wood  Header attached to Track with Ball Bearing Roller                   System.   Available - 4- Wheel  Ball Bearing Soft Close or Soft Open -  220 lbs Pocket Door EZ Closer   NOTE:  Doors that are  18"  to  28" Wide can only have EITHER a  Soft Close or...

New HBP Pocket Door Soft Close / Soft Open   Hartford Building Products has a new soft close for our pocket door frame kits, and our Series 1 track system. This is a much heavier duty soft close, having a 220 pound capacity, instead of the old 140 pound. A nice new feature is the metal connector for the sections, where they go together, instead the old plastic connector.   This soft close can replace the old ones, if needed, since they fit in the same track. It is just a much better system.

HBP- Heavy Duty  4- Wheel Ball Bearing Soft Close  for Pocket Doors or Bypass Doors  Fits our:  * 2450 Series Pocket Door Frame Kit  *2650 Series Pocket Door Frame Kit   *Series 1 Pocket Door Track and Hardware Kit.  *Series 1 BYPASS Track and Hardware Kit ****For Doors up to 187 pounds Soft Close smoothly causes the door to brake and then the mechanism pulls the door into its final closed position. Soft Close minimizes door slams and pitched fingers. https://www.hartfordbuildingproducts.com/products/4-wheel-soft-close-and-soft-open-for-pocket-doors