News — Bypass Track and Hardware

Check out our Series 1 HBP Heavy Duty Bypass Track and Hardware Kits Bypass doors are composed of two doors normally that slide past each other in the door opening.  Since there are less doors used than in a Bifold of the same size, each door is normally wider,  For instance, a 6' wide closet would have two  3' (36" ) wide doors to make up the width. A thing to also remember is when using a Bypass door installation, the opening may have to be undersized slightly, to allow for an overlap, or make one of the doors wider,...

Series 1- Heavy Duty Bypass Hardware Kit- 4 Wheel Ball Bearing Hangers Bypass Doors,  are two doors, with two tracks, one track is in front and the other track is  behind, to allow the doors to slide in front of each other.  This allows you to put the doors end to end or one in front of the other.   Details.. For 1 3/8” to 1 3/ 4” Thick Doors Track is Heavy Duty Extruded Aluminum 4­ Wheel Ball Bearing Hangers **New and Improved Ball Bearing Rollers with Axles Jump proof twin Channel Design, with “V” shaped Rails and Integral Two...

HBP- Heavy Duty  4- Wheel Ball Bearing Soft Close  for Pocket Doors or Bypass Doors  Fits our:  *HBP 2x4 Series Pocket Door Frame Kit  *HBP 2x6 Series Pocket Door Frame Kit   *Series 1 Pocket Door Track and Hardware Kit.  *Series 1 BYPASS Track and Hardware Kit ****For Doors up to 220 pounds Soft Close smoothly causes the door to brake and then the mechanism pulls the door into its final closed position. Soft Close minimizes door slams and pitched fingers. https://www.hartfordbuildingproducts.com/products/4-wheel-soft-close-and-soft-open-for-pocket-doors  

Bypass doors are composed of two doors normally that slide past each other in the door opening.  Since there are less doors used than in a Bifold of the same size, each door is normally wider,  For instance, a 6' wide closet would have two  3' (36" ) wide doors to make up the width.  In some special circumstances, you  can also use three or more doors, with a custom installation. A thing to remember is when using a Bypass door installation, the opening may have to be undersized slightly, to allow for an overlap, or make one of the...